SSANGYONG RODIUS 2005.07 Manual page 328

(1) Wiper MIST and washer coupled wiper
1) When turning on the washer switch while the wiper relay is operating.
If the wiper relay "ON" request time is shorter than the remained "ON" time, it is
-
disregarded.
(2) Speed sensitive INT (intermittent) wiper
The wiper relay continues to output for remaining "ON"
1)
switch is turned off.
IGN 2 switch "ON", INT switch "OFF": resume the intermittent time when turning
2)
"ON"
3)
IGN 2 switch "OFF", INT switch "ON": resume the intermittent time when turning
(3) Controls when the wiper motor parking is defective
"ON"
- The wiper relay continues to output when the parking terminal is fixed at the ground or
IGN while the wiper relay is "ON" (INT switch = ON or Washer switch = ON) (The
output stops immediately after turning off the switch)
0-15
8710-01
time even when the INT
STICS
RODIUS 2005.07