SSANGYONG REXTON 2006.09 Manual page 733

0-27
4892-01
F. INPUT/OUTPUT SIGNALS FOR HDC OPERATION G. OPERATION OF HDC INDICATOR CONTROLLER
This table describes the coming-on and blinking mode of HDC indicator according to the HDC
switch operation (ON/OFF). The HDC indicator on the instrument panel has two modes;
green (function lamp) and red (warning lamp). The HDC switch is a push & self return type
switch ? when you press it once, it starts to operate and when you press it again, it stops the
operation.
H. ESP (ELECTRONIC STABILITY PROGRAM)
ESP (Electronic Stability Program) recognizes critical driving conditions, such as panic
reactions in dangerous situations, and stabilizes the vehicle by wheel-individual braking and
engine control intervention with no need for actuating the brake. This system is developed to
help the driver avoid the danger of losing the control of the vehicle stability due to under-
steering or over-steering during cornering.
CIRCUIT
REXTON 2006.09