SSANGYONG REXTON 2006.09 Manual page 489

05-8
8810-05
6) Deployed Airbag Module Disposal Procedure
After deployment, a powdery residue may be on the surface of the airbag. The powder consists
primarily of cornstarch (used to lubricate the bag as it inflates) and by-products of the chemical
reaction. Sodium hydroxide dust (similar to lye soap) is produced as a by-product of the
deployment reaction. The sodium hydroxide then quickly reacts with atmospheric moisture and
is converted to sodium carbonate and sodium bicarbonate also known as baking soda}.
Therefore, it is unlikely that sodium hydroxide will be present after deployment. Wear gloves
and eye protection during the disposal procedure.
After deployment, the metal surfaces of the airbag module will be hot. In order to avoid the risk
of an injury or a fire, do not place the deployed airbag module near any flammable objects, and
allow the airbag module to cool for 30 minutes before handling. Deploy an airbag or
pretensioner before disposing of it.
This includes those in a whole vehicle being scrapped. If the vehicle is still within the warranty
period contact the SsangYong regional service manager for approval or special instructions
before deploying an airbag module or pretensioner.
AIR BAG AND SEAT BELT
REXTON 2006.09