SSANGYONG REXTON 2006.09 Manual page 265

WIPER AND WASHER
OVERVIEW AND OPERATION PROCESS
1. OVERVIEW
The wiper and washer system are controlled by STICS according to driver's wiper switch
operation. And the detection of rain drops by rain sensor is transmitted to STICS as the signal
for wiper system control. The characteristics of the wiper and washer system including basic
functions of manual wiper are as follows.
1. Wiper function coupled auto washer
When the key is on and the front wiper
switch is off and this switch is pressed,
washer fluid will be sprayed and the wiper
will automatically operate 4 times. Then, the
fluid will be sprayed again and the wiper will
automatically operate 3 times.
2. Integrated auto light sensor in rain
sensor unit
The rain sensor unit is installed on a proper
location to detect the rain drops and the
illumination intensity. When the wiper is in
operation in LO mode by the rain sensor, the
headlamps come on if the light switch is in
AUTO to secure the visibility in rain. To
control the system, the sensed values of rain
sensor and auto light sensor are sent to pin
no. 63 in STICS unit.
3. Rear washer fluid supply system
There is no separation of washer fluid
reservoir for the rear washer system in this
vehicle. The rear washer system uses the
front washer fluid reservoir.
08-3
7810-01
7810-01
WIPER
undefined