SSANGYONG REXTON 2006.09 Manual page 378

11-4
3310-01
OVERVIEW AND OPERATION PROCESS
1. OVERVIEW
The propeller shaft transfers the power through the transmission and transfer case to the
front/rear axle differential carrier (final reduction gear).
It is manufactured by a thin rounded steel pipe to have the strong resisting force against the
torsion and bending.
Both ends of propeller shaft are connected to the spider and the center of propeller shaft is
connected to the spline to accommodate the changes of the height and length.
The rubber bushing that covers the intermediate bearing keeps the balance of rear propeller
shaft and absorbs its vibration.
PROPELLER SHAFT
REXTON 2006.09