SSANGYONG REXTON 2006.09 Manual page 191

02-16
8710-08
▶
Washer Coupled Wiper in Rain Sensing Mode
1. The washer coupled wiper is operated when receiving the washer switch input with the
ignition switch "ON" and the AUTO switch "ON" in the rain sensing mode. At this moment,
the communication with the rain sensor is overridden. However, the washer switch input is
overridden during the continuous operation.
2. The operation data is sent to the rain sensor even during the washer coupled wiper's
operation.
▶
Rain Sensing Sensitivity Control
1. The wiper LOW relay is turned on and the wiper motor runs one cycle when the volume
sensitivity is increased (while the ignition key is in the "ON" position, the AUTO switch is in
the "ON" position, and the wiper motor is in "Parked" position). However, the wiper motor
can be operated only when the rain sensor detects the "Rain Detected" signal.
* If the volume sensitivity is changed more than 2 stages within 2 seconds, the wiper motor
runs only one cycle.
RKSTICS
undefined