SSANGYONG REXTON 2006.09 Manual page 253

8. CIRCUIT DIAGRAM
1) Connector Pin Arrangement (for Deluxe version)
These connectors are viewed from the cluster body. The arrangement of the pin in the main
connector is the same as the one of the sub connector. The common specifications for CAN
communication are:
- Protocol: Standard format CAN 2.0B (2.0A included)
- Communication speed: 500 Kbps ±
- End resistance: 120W ± 5%
- Configuration of frame standard format: data frame, remote frame, error frame and
overload frame
Connector A - 20 pins
1. Door open
2. Oil pressure
3. Seat belt
4. Charge
5. Light (-)
6. -
7. IGN (+) - Alternator
8. Signal ground
9. -
10. Battery (+)
11. Parking brake signal (output)
12. Auto parking switch
13. Easy loading switch
14. Light (+)
15. -
16. Turn signal lamp (RH)
17. High beam (-)
18. Headlamp (+)
19. Turn signal lamp (LH)
20. Parking brake signal (input)
0.2%
Connector B - 20 pins
1. Neutral switch input (M/T)
2. Reverse switch input (M/T)
3. ESP/Water separator/Coolant temperature
warning, EPB, Over speed warning
4. Speed signal output
5. CAN_ HIGH
6. CAN_LOW
7. -
8. Air bag
9. Engine CHECK lamp
10. -
11. Fuel sender input
12. Park position output
13. Fuel sender ground
14. MICOM ground
15. IGN (+)
16. -
17. -
18. -
19. Front fog lamp
20. SSPS
04-25
8010-01
CLUSTER
undefined