SSANGYONG REXTON 2006.09 Manual page 248

04-20
8010-01
3) Operation of HDC Indicator Controller
Pressed
CLUSTER
undefined
This table describes the coming-on and blinking mode of
HDC indicator according to the HDC switch operation
(ON/OFF). The HDC indicator on the instrument panel has
two modes; green (function lamp) and red (warning lamp).
The HDC switch is a push & self return type switch ? when
you press it once, it starts to operate and when you
press it again, it stops the operation. For its functions and
operation logic, refer to "ABS/ESP" in Chassis section.
Basically, the brake system's basic functions can work
even when there are problems with the HDC system. As
given in the table above, the HDC warning lamp comes
on when:
- Initial ignition ON
- HDC system error occurs
- Brake system overheat