SSANGYONG REXTON 2006.09 Manual page 345

05-6
3240-01
▶ Shift Motor
When selecting a position in 4WD switch, the shift control unit exactly changes the motor
position to 2H, 4H and 4L by the position encoder in control unit that monitors motor position.
Rear view of Shift Motor connector
▶ Speed Sensor and Clutch Coil
The rear speed sensor utilizes the hall effect. It generates 0V and 5V of square type digital
wave according to the rotation of the wheel with teeth of transfer case rear output shaft. The
speed signal from rear propeller shaft is entered into control unit.
When the control unit determines that 4WD HIGH operation is available, electric current flows
into the clutch coil. The coil magnetized by this electric current pull in the lockup hub to engage
into output spline. Accordingly, the power is transferred to front wheels.
Rear view of Speed Sensor and
Clutch Coilconnector
PART TIME TRANSFER CASE
REXTON 2006.09