SSANGYONG REXTON 2006.09 Manual page 333

03-22
3170-01
6) Bearing
The needle bearings are introduced to each gear and the taper roller bearings are used for
input and counter shaft in transmission housing.
Taper roller bearing
1.
Taper roller bearing
(input shaft, counter shaft and output shaft)
2. Needle bearings for 1/2 and 3/4 shift
7) End Play of Taper Roller Bearing
1. Taper roller bearing for input shaft
2. Taper roller bearing for counter shaft
Use the following spacers to adjust the end play (A or B) between input shaft and counter shaft.
(Specified range of end play: 0.05 ~ 0.1 mm)
-
For input shaft: 0.75 ~ 1.45 mm (15 spacers with increment of 50 μm)
-
For output shaft: 0.4 ~ 1.45 mm (10 spacers with increment of 50 μm)
MANUAL TRANSMISSION
REXTON 2006.09
Needle bearing
3.
Needle bearing for reverse gear
(with cut out area)
4. Needle bearing for 5th gear
A. End play A: 0.85 ~ 2.28 mm
B. End play B: 1.17 ~ 1.97 mm