SSANGYONG REXTON 2006.09 Manual page 475

03-14
6910-03
5. COMPONENTS AND COMPOSITIONS
There is no need to disassemble the FFH unit for repair. This section is to show the internal
components of the FFH unit.
1) Jacket cover
2) Control and overheating Sensor
▶Check control and overheating sensor
FFH SYSTEM
REXTON 2006.09
- The O-rings are installed between jacket
- cover and two coolant hoses.
The coolant hoses should be connected to
right side.
1. Jacket
2. Jacket cover
3. Cable harness cover
The Control and overheating sensor and
cable harness make up one component.
1. Control and overheating sensor
2. Pressure spring
Check the control and overheating sensor
with a digital multimeter. If the resistance
according to the changes of flame sensor
temperature is out of specified values, the
flame sensor is defective.