Table of Contents
Advertisement
11-10
2) EBD (Electronic Brake-force Distribution) Warning Lamp (Brake
Warning Lamp)
EBD warning lamp when the system perform the self diagnosis and when it detects the malfunction of
EBD system. However, the brake warning lamp comes on regardless of EBD when the parking brake is
applied.
EBD warning lamp ON:
1.
When turning the ignition switch to ON position, ABS warning lamp and the brake warning lamp
comes on for 3 seconds for self diagnosis and goes off if the system is OK (initialization mode).
When applying the parking brake, the brake warning lamp comes on.
2.
When the brake fluid is not sufficient, the brake warning lamp comes on.
3.
When the self-diagnosis is performing, the warning lamp comes on.
4.
When the HECU connector is disconnected, the warning lamp comes on.
5.
When the system is defective, ABS warning lamp and the brake warning lamp come on
6.
simultaneously.
a.
When the solenoid valve is defective
b.
When one or more wheel sensors are defective
c.
When ABS HECU is defective
d.
When the voltage is abnormal
e.
When valve relay is defective
7.
When the communication between warning lamp CAN module in meter cluster, the warning lamp
comes on.
3) ESP OFF Indicator
ESP OFF indicator ON:
1.
When turning the ignition switch to ON position, ESP warning lamp comes on for 3 seconds for self
diagnosis and goes off if the system is OK (initialization mode).
2.
When the ESP OFF switch is pressed to turn off ESP function, ESP OFF indicator comes on.
4) ESP Warning Lamp
1.
ESP warning lamp ON:
2.
When turning the ignition switch to ON position, ESP warning lamp comes on for 3 seconds for self
diagnosis and goes off if the system is OK (initialization mode).
3.
When the system is defective, the warning lamp comes on.
4.
When the ESP function is activated, ESP warning lamp blinks with the interval of 2 Hz.
5.
When the communication between warning lamp CAN module in meter cluster, the warning lamp
comes on.
5) ESP OFF Switch
If ESP OFF switch is pressed, ESP function is deactivated and the ESP OFF indicator in the instrument
cluster comes on.
To resume the ESP function, press the switch again. At this time, ESP OFF indicator goes out.
Advertisement
Table of Contents
Troubleshooting
