Table of Contents
Advertisement
10-12
2) EBD (Electronic Brake-force Distribution) Warning Lamp
EBD warning lamps (brake warning lamp and ABS warning lamp) come on when the system
performs the self diagnosis and when it detects the malfunction of EBD system. However, the
brake warning lamp comes on regardless of EBD system when the parking brake is applied.
EBD warning lamp ON:
A.
When turning the ignition switch to ON position, ABS warning lamp and the brake warning
lamp comes on for 3 seconds for self diagnosis and goes off if the system is OK
(initialization mode).
B.
When applying the parking brake, the brake warning lamp comes on.
C.
When the brake fluid is not sufficient, the brake warning lamp comes on.
D.
When disengaging the connector, the warning lamp comes on.
E.
When the system is defective, ABS warning lamp and the brake warning lamp come on
simultaneously.
a.
When the solenoid valve is defective
b.
When one or more wheel sensors are defective
c.
When ABS HECU is defective
d.
When the voltage is abnormal
e.
When valve relay is defective
F.
When the communication between warning lamp CAN modules in meter cluster is failed,
the warning lamp comes on.
Advertisement
Table of Contents
Troubleshooting
