Panic Alarm By Skm Smart Key's Remote Control - SSANGYONG Korando 2012 Manual

03-46
▶

Panic alarm by SKM smart key's remote control

1. When the BCM receives "Panic command by smart key remote control" as a BCAN signal, it
activates panic alarm by operating the horn and turn signal lamp for 30 seconds with a interval of
0.5s ON/0.5s OFF. However, the BCM used in EU region is operated when receiving the panic
command from the smart key remote control and the signal that the smart key is in the vehicle with
Power OFF, ACC and IGN ON.
2. The BCM stops the panic function and operates the function depending on the signal in the event of
following commands during turn signal lamp and horn operation by the "Panic command from smart
key remote control".
- Stops panic function activated by "Panic command from smart key remote control" through
BCAN signal
- Panic function is activated when receiving other command
3. The panic alarm stops and then the theft deterrent alarm starts its operation when occurring the theft
deterrent alarm conditions during panic alarm.
4. All the functions are controlled by SKM and operated by signal from SKM.