Table of Contents
Advertisement
1. SPECIFICATIONS
Operating voltage
Operating current (open & close)
At no load
Leakage current
Roof motor operating speed
(at opening and closing)
Motor overload stop conditions
2-step opening amount
Vertical/horizontal tolerance for
sunroof glass panel
2. CAUTIONS WHEN WORKING
1.
Wear clean work clothes and gloves.
2.
Replace and wash the gloves frequently.
3.
Any unauthorized modification or operational test is not allowed since the sunroof motor and control
unit are preset at the factory.
4.
You can use basic tools, e.g. a 25T/10T star screwdriver, flat-bladed and cross-tip screwdrivers. Do
not use any similar tool.
5.
Take care not to drop the sunroof assembly when removing it and do not keep it right up.
9 to 16 V
Max. 6 A
Approx. 3 A
Max. 1 mA or less
1.4 ± 0.5 sec./100 mm
Current for 25 A or higher and torque (load) for 7.5 Nm
or higher
1st step sliding open: 370 ± 5 mm
2nd step sliding open: 450 ± 5 mm
± 2 mm
04-3
7340-00
Advertisement
Table of Contents
Troubleshooting
