Table of Contents
Advertisement
04-10
4. ZERO POINT SETTING
If the sunroof is stopped midway due to a discharged battery or power failure, you need to re-calibrate the
starting point of the sunroof. In addition, the following cases need reset of the starting point for the
sunroof. (See page 20 in Reset of Sunroof Zero Point (Initialization))
-
The sunroof does not completely close or open by operating the switch once.
-
The sunroof slides back to close. But the operation does not stop even after a complete close and
tilts up the sunroof.
-
The opening gap remarkably decreases for the sliding open or tilt up.
-
Operation of the sunroof switch does not do anything or work properly.
-
The operating process is not same as before due to discharged or disconnected battery.
Advertisement
Table of Contents
Troubleshooting
