Table of Contents
Advertisement
14-6
▶
Measuring at (-) wiring
▶
Measuring the battery voltage
-
Measure the voltage between battery wiring
and body ground.
Specified value
If the voltage is out of the specified value,
check the wiring mounting bolt for corrosion
and looseness. If there is a poor contact due
to corrosion or paint, wipe out the contact area
and retighten it.
Wiring mounting bolt to body
ground (-): 17 Nm
-
Stop the engine and wait for 20 minutes.
Measure the voltage between terminal (+)
and terminal (-) with the ignition switch OFF
and all electric devices OFF.
Specified value
below 0.3V
over 12V
Advertisement
Table of Contents
Troubleshooting
