Table of Contents
Advertisement
2. CHECKING CABLES AND WIRES
-
Check for loose connection or rust.
-
Check terminals and wires for corrosion due to electrolyte leakage.
-
Check terminals and wires for open circuit.
-
Check the wire insulation and coat for damage, cracks or deterioration.
-
Check if the conductive parts of the terminals do not contact with vehicle body or other metal parts.
Check that the grounding part has continuity with mounting bolts and vehicle body.
-
Check that wires are properly routed.
-
Make sure that wires are securely fixed to avoid contact with sharp body parts and high-temperature
-
parts, such as the exhaust manifold and exhaust pipes.
The rotating parts, such as fan pulley and fan belt, perturbative parts and wiring should be secured
-
tightly at regular intervals.
Secure the wiring between the fixed parts, such as the vehicle body, and vibrating parts, such as the
-
engine, after slackening it slightly to prevent it from being damaged.
02-5
8410-00
Advertisement
Table of Contents
Troubleshooting
