Emerson Fisher FIELDVUE DVC6005 Series Quick Start Manual page 30

Remote mount digital valve controllers

Hide thumbs Also See for Fisher FIELDVUE DVC6005 Series:

Instruction manual supplement (10 pages)

DVC6005 Digital Valve Controllers

March 2018

Table 1. User Interface Tools and Software Available for Instrument Configuration and Calibration

475 Field Communicator (DD)

AMS Device Manager (DD)

ValveLink Software

ValveLink Mobile Software

Field Device Type Frame (DTM)

2. Apply pneumatic supply pressure to the digital valve controller and adjust the supply pressure regulator according

to the actuator requirements and limitations.

3. Apply electrical power to the digital valve controller.

4. Establish communication with the digital valve controller and commission the instrument as described in the host

system documentation.

Note

If the TALK terminals on the digital valve controller are to be used for communication, remove the terminal box cap to access the

terminals.

5. Launch the user interface tool.

6. Perform Device Setup to configure and calibrate the instrument on the control valve assembly.

7. Enter any additional custom configuration items (optional).

Note

On HART devices with I/O package, you must enable and configure the output terminals. The configuration is disabled by default

from the factory.

8. To enable the digital valve controller to follow set point, place the instrument In Service (HART devices) or place the

transducer block in Auto (fieldbus devices).

Neither Emerson, Emerson Automation Solutions, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance

of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.

Fisher, FIELDVUE, and ValveLink are marks owned by one of the companies in the Emerson Automation Solutions business unit of Emerson Electric Co.

Emerson Automation Solutions, Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. HART and the HART logo are

registered trademarks of FieldComm Group. F

property of their respective owners.

The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not

to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are

governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such

products at any time without notice.

Emerson Automation Solutions

Marshalltown, Iowa 50158 USA

Sorocaba, 18087 Brazil

Cernay, 68700 France

Dubai, United Arab Emirates

Singapore 128461 Singapore

www.Fisher.com

DVC6005

HART

fieldbus and the Fieldbus logo are trademarks of FieldComm Group. All other marks are the

OUNDATION