Network Stack Configuration - HPE Apollo 70 Series User Manual

Network Stack Configuration

To open the Network Stack Configuration page, select Advanced  Network Stack Configuration from
the Setup.
Network Stack: Enable/Disable UEFI Network Stack
Ipv4 PXE Support: Enable/Disable IPv4 PXE boot support. If disabled
Ipv4 HTTP Support: Enable/Disable IPv4 HTTP boot support. If disabled
Ipv6 PXE Support: Enable/Disable IPv6 PXE boot support. If disabled
Ipv6 HTTP Support: Enable/Disable IPv6 HTTP boot support. If disabled
PXE boot wait time: Wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or
numeric keys to set the value.
Media detect count: Number of times the presence of media is checked. Use either +/- or numeric keys
to set the value.
15