Server Mgmt - HPE Apollo 70 Series User Manual

Server Mgmt

To open the Server Mgmt page, select Server Mgmt from the Step.
BMC Self Test Status:
BMC Device ID: Displays BMC device ID.
BMC Device Revision: Displays BMC device revision.
BMC Firmware Revision: Displays BMC firmware revision.
IPMI Version: Displays IPMI version
BMC Interface(s) : Displays BMC interface.
BMC Support: Enables or Disables interfaces to communicate with BMC.
FRB-2 Timer: Enables or Disables FRB-2 timer (POST timer).
FRB-2 Timer timeout: Allows a value between 3 to 6 min for FRB-2 Timer Expiration value.
FRB-2 Timer Policy: Configure how the system should respond if the FRB-2 Timer expires. Not available
if FRB-2 Timer is disabled.
OS Watchdog Timer: If enabled

OS Wtd Timer Timeout: Configure the length of the OS Boot Watchdog Timer. Not available if OS Boot
Watchdog Timer is disabled.

OS Wtd Timer Policy: Configure how the system should respond if the OS Boot Watchdog Timer expires.
Not available if OS Boot Watchdog Timer is disabled.
Serial Mux:
System Event Log: Changes the SEL event log configuration.
View FRU information: Views FRU information.
BMC network configuration: Configure BMC network parameters
View System Event Log: Press <Enter> to view the System Event Log Records.
BMC User Settings: Press <Enter> to Add.
BMC Warm Reset: Do warm reset BMC.
30
Displays self-test status.
Enables or disables Serial Mux configuration.