Console Redirection Settings - HPE Apollo 70 Series User Manual

Console Redirection Settings

To open the Console Redirection Settings page, select Advanced  Serial Port Console Redirection
 Console Redirection Settings from the Aptio Setup Utility.
Terminal Type:

ANSI: Extended ASCII char set.

VT100: ASCII char set.

VT100+: Extends VT100 to support color.
Bits per second: Selects serial port transmission speed. The speed must be matched on the other side.
Long or noisy lines may require lower speeds.
Data Bits: Data Bits
Parity: Sent with the data bits to detect some transmission errors.

Even: parity bit is 0 if the number of 1's in the data bits is even.

Odd: parity bit is 1 if the number of 1's in the data bits is odd.
Stop Bits: Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning). The
standard setting is 1 stop bit.
Flow Control: Prevents data loss from buffer overflow. When sending data.
VT-UTF8 Combo Key Support: Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals.
Recorder Mode: Enable so that only text is sent. This is used to capture Terminal data.
Resolution 100x31: Enables or disables extended terminal resolution
Putty KeyPad: Select FunctionKey and KeyPad on Putty.
13