Change Smbios Event Log Settings; Enabling/Disabling Options; Erasing Settings; Smbios Event Log Standard Settings - HPE Apollo 70 Series User Manual

Change Smbios Event Log Settings

To open the Change Smbios Event Log Setting page, select Event Logs  Change Smbios Event Log
Setting from the Setup.

Enabling/Disabling Options

Smbios Event Log: Enables or disables all features of Smbios Event Logging during boot.

Erasing Settings

Erase Event Log: Select options to erase the Smbios Event Log. Erasing is done prior to any logging
activation during reset.
When Log is Full: Select options for reactions to a full Smbios Event Log.

Smbios Event Log Standard Settings

Log System Boot Event: Enable or disable logging the System boot event
Multiple Event Count Increment (MECI): The number of occurrences of a duplicate event that must
happen before the multiple-event counter of log entry is updated.
Multiple Event Time Window (METW): The number of minutes which must happen between duplicate
log entries which utilize a multiple-event counter. The value ranges from 0 to 99 minutes

Custom Options

Log EFI Status Code: Enable or disable logging the EFI Status Codes as OEM reserved type E0 (if not
already converted to legacy).
Convert EFI Status Codes to Standard Smbios Type: Enable or disable converting the EFI Status
Codes to Standard Smbios Types (Not all may be translate).
NOTE:
All values changed here do not take effect until computer is restarted.
28