Bmc Network Configuration - HPE Apollo 70 Series User Manual

BMC network configuration

To open the BMC network configuration page, select Server Mgmt  BMC network configuration from
the Step.
Configure IPV4 support

Configuration Address source: Configure LAN channel parameters statically or dynamically (by
BIOS or BMC). Unspecified option will not modify an

Current Configuration Address source: Configuration for the current LAN either statically or
dynamically (by BIOS or BMC). Unspecified for not Configured address space

Station IP address: Station IP address from BMC

Subnet mask: Subnet mask from BMC

Station MAC address: Station MAC address from BMC

Router IP address: Router IP address from BMC

Router MAC address: Router MAC address from BMC
Configure IPV6 support

Configuration Address source: Select to configure LAN channel parameters statically or
dynamically (by BIOS or BMC). Unspecified option will not modify an

Current Configuration Address source: Current Ipv6 LAN Configuration statically or dynamically
(by BMC). Unspecified for not Configured address space.

Station IPV6 address: Station IPV6 address from BMC

Prefix Length:

IPV6 Router1 IP Address: Station IPV6 router address from BMC

IPV6 address status: Status of station IPV6 address to BMC.

IPV6 DHCP Algorithm: Providing the DHCP method used like DHCPv6 or StateLess Address Auto
Configuration (SLAAC).
Note:
IPV6 is not supported in BMC (OR). IPV6 support is disabled.
33