Hitachi SJ700D-3 SERIES Quick Reference Manual page 64

Chapter 4 List of Data Settings
Code Function name
A081 AVR function select
A082 AVR voltage select
A085 Operation mode selection
A086 Energy saving mode tuning
A092 Acceleration (2) time setting
A292 Acceleration (2) time setting, 2nd motor
A392 Acceleration (2) time setting, 3rd motor
A093 Deceleration (2) time setting
A293 Deceleration (2) time setting, 2nd motor
A393 Deceleration (2) time setting, 3rd motor
Select method to switch to Acc2/Dec2
A094
profile
Select method to switch to Acc2/Dec2,
A294
2nd motor
A095 Acc1 to Acc2 frequency transition point
Acc1 to Acc2 frequency transition point,
A295
2nd motor
A096 Dec1 to Dec2 frequency transition point
Dec1 to Dec2 frequency transition point,
A296
2nd motor
A097 Acceleration curve selection
A098 Deceleration curve setting
A101 [OI]-[L] input active range start frequency
A102 [OI]-[L] input active range end frequency
A103 [OI]-[L] input active range start current
A104 [OI]-[L] input active range end current
A105 [OI]-[L] input start frequency enable
[O2]-[L] input active range start
A111
frequency
A112 [O2]-[L] input active range end frequency
A113 [O2]-[L] input active range start voltage
A114 [O2]-[L] input active range end voltage
A131 Acceleration curve constants setting
A132 Deceleration curve constants setting
A141 Operation-target frequency selection 1
A142 Operation-target frequency selection 2
A143 Operator selection
A145 Frequency to be added
A146 Sign of the frequency to be added
EL-S-curve acceleration
A150
ratio 1
EL-S-curve acceleration
A151
ratio 2
EL-S-curve deceleration
A152
ratio 1
EL-S-curve deceleration
A153
ratio 2
*1 This setting is valid only when the OPE-SR is connected.
(Note) CT : Constant torque mode, VT : Variable torque mode, you can set CT or VT by b049.
Monitored data or setting
00 (always on), 01 (always off), 02 (off during deceleration)
200 V class: 200, 215, 220, 230, 240 (V)
400 V class: 380, 400, 415, 440, 460, 480 (V)
00 (normal operation), 01 (energy-saving operation)
02 (fuzzy operation)(only CT)
0.0 to 100.0
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
0.01 to 99.99, 100.0 to 999.9, 1000. to 3600. (s)
00 (switching by 2CH terminal), 01 (switching by setting),
02 (switching only when rotation is reversed)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.00 to 99.99, 100.0 to 400.0 (Hz)
00 (linear), 01 (S curve), 02 (U curve),
03 (inverted-U curve), 04 (EL-S curve)
0.00 to 99.99, 100.0 to 400.0 (Hz)
0.00 to 99.99, 100.0 to 400.0 (Hz)
(In case of setting 0.00, internal setting is "Maximum
frequency ")
0. to "[OI]-[L] input active range end current" (%)
"[OI]-[L] input active range start current" to 100. (%)
00 (external start frequency), 01 (0 Hz)
-400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz)
-400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz)
-100. to 02 end-frequency rate (%)
"02 start-frequency rate" to 100. (%)
01 (smallest swelling) to 10 (largest swelling)
01 (smallest swelling) to 10 (largest swelling)
00 (digital operator), 01 (keypad potentiometer),
02 (input via O), 03 (input via OI),
04 (external communication), 05 (option 1), 06 (option 2),
07 (pulse-string frequency input)
00 (addition: A141 + A142), 01 (subtraction: A141 - A142),
02 (multiplication: A141 x A142)
0.00 to 99.99, 100.0 to 400.0 (Hz)
00 (frequency command + A145),
01 (frequency command - A145)
0. to 50. (%)
0. to 50. (%)
4 - 6
Change during
Default
RUN operation
FF FEF FUF
b031≠10 b031=10
02 00 00
Not
200/ 230/ 230/
Not
400 400 460
00 Not
50.0
Allowed Allowed
15.00 Allowed Allowed
15.00
Allowed Allowed
15.00 Allowed Allowed
15.00 Allowed Allowed
15.00
Allowed Allowed
15.00 Allowed Allowed
00 Not
00 Not
0.00 Not
0.00 Not
0.00 Not
0.00 Not
00 Not
00 Not
0.00
Not Allowed
0.00 Not Allowed
20.
Not Allowed
100. Not Allowed
00 Not Allowed
0.00 Not Allowed
0.00 Not Allowed
-100. Not Allowed
100.
Not Allowed
02 Not Allowed
02
Not Allowed
02
Not Allowed
03 Not Allowed
00
Not Allowed
0.00 Not Allowed
00 Not Allowed
25.
Not
25. Not
25. Not
25.
Not
Not
Not
Not
Not
Not
Not
Not
Not
Not
Not
Not
Not
Not
Not
Not