Hitachi SJ700D-3 SERIES Quick Reference Manual page 56

Chapter 3 Operation
Example of operation in full display mode ("b037" = "00") [Factory setting]
All parameters can be displayed in full display mode. If you use other display mode, refer to the SJ700D-3
Instruction Manual.
Key operation and transition
of codes on display (in
monitor or function mode)
1 2
Pressing the or
or decreases the numerical data displayed in data display mode.
Press the 1 or 2 key until the desired code or numerical data is shown. To scroll codes or increase/decrease
numerical data fast, press and hold the key.
Key operation and transition
of monitored data on display
(in monitor or function
mode)
*1
Monitor
*2
mode
FUNC
(Monitor
display)
(*1)
or
FUNC STR
Function
mode
FUNC
(Data display)
(*1) (*2)
or
FUNC STR
FUNC
FUNC
FUNC
FUNC
FUNC
FUNC
Refer to the
SJ700D-3
Instruction Manual.
or
FUNC STR
key respectively scrolls up or down the code displayed in code display mode or increases
Key operation and transition
of codes on display (in
extended function mode)
The content of the display varies depending on the parameter type.
To update numerical data, be sure to press the
changing the data.
or
FUNC STR
or
FUNC STR
or
FUNC STR
or
FUNC STR
or
FUNC STR
3 - 6
Key operation and transition
of monitored data on display
(in extended function mode)
key after
STR
(*1) (*2)
(Data display)
Extended
function
mode A
FUNC
or
FUNC STR
Extended
function
mode B
Extended
function
mode C
Extended
function
mode H
Extended
function
mode P