Related Manuals for Key Digital KD-X4x1WUTx
Summary of Contents for Key Digital KD-X4x1WUTx
- Page 1 KD-X4x1WUTx 4x1 4K/18G 100m HDBT PoH Wall Plate Switcher with 2x HDMI, DP, USB-C, USB, LAN, ARC, IR, RS-232, IP Control, CEC Manager . Transmitter Only. ™ Operating Instructions The Experts in Digital Video Technology and Solutions ™...
-
Page 2: Table Of Contents
™ of the connected display for a simplistic all-in-one integration system . KD-X4x1WUTx is HDCP 2 .2 compliant and supports 4K/UHD 24/25/30/60 (4:4:4) resolutions with up to 18Gbps bandwidth . 4K/ UHD signals are extended up to 100m / 328ft and 1080p up to 150m / 492ft via single CAT5e/6 cable . - Page 3 KD-App Ready: Network scan & detect populates pre-built GUI including connected display/projector › controls via CEC Manager ™ Ease of Integration: Complete configuration using Key Digital Management Software ™ › HDCP Licensing: Fully licensed and compatible with HDCP 2 .2 ›...
-
Page 4: Quick Setup Guide
6. To send the selected audio source into audio systems, connect from the analog or digital audio de- embed outputs of the Rx unit / presentation switcher 7. Connect control system or PC to LAN port of the KD-X4x1WUTx or the Rx for network connectivity 8. Connected monitors are controlled by CEC Manager on the HDMI connection . -
Page 5: Integration Options
Integration Options Integration with KD-X100MRx Receiver: Presentation Switcher KD-PS42 with KD-AMP220 WiFi Router WiFi KD-X4x1WUTx K E Y D I G I TA L APP READY KD-X100MRx KD-CAMUSB DSP/Mixer KD-AMP220 KD-AMP220 Line Bass Treble Mute Input Control Amplifier... - Page 6 Integration with KD-UPS52U: AppleTV PC (DisplayPort) Signage (USB-C) Cable/Satellite WiFi Router WiFi K E Y D I G I TA L APP READY KD-X4x1WUTx Presentation Switcher KD-PS42 with KD-AMP220 DSP/Mixer KD-UPS52U KD-AMP220 KD-X100MRx KD-AMP220 Line Bass Treble Mute Input Control...
- Page 7 KDMS Pro Download ™ 1. Connect to KD-X4x1WUTx from your PC using the USB micro port on the face of the unit 2. Open KDMS Pro software and perform a USB Device scan (fig . 1a-1b) ™...
- Page 8 7. If using KD-App or KDMS for control, set the desired Input/Output names by entering the Input/ Output Settings section of the properties window, and selecting the Change Input/Output Name button (fig . 3a), selecting the desired input/output and entering the name (fig . 3b) 8.
- Page 9 Connect and configure KD- X4x1WUTx as described in this Quick Setup Guide . » Download and open KD-App and/or KDMS » Ensure the iOS device and/or PC computer are on the same network with KD-X4x1WUTx » Perform a network scan in the KD-App/KDMS »...
- Page 10 Option 3: Control via professional control system KD-X4x1WUTx allows control over TCP/IP interface for bi-directional communication . You may connect to the LAN port of the KD-X4x1WUTx, KD-X100MRx, or KD-UPS52U to deliver network connectivity to the Key Digital devices .
-
Page 11: Connections, Buttons, And Leds
Connections, Buttons, and LEDs Front Connections and LEDs HDMI Inputs: Using an HDMI cable, connect your HDMI sources . › Supports up to UHD/4K @ 50/60 fps [4:4:4], 18Gbps » See Supported Standard 4K Video Formats table below » Supports HDR10 and Dolby Vision »... - Page 12 Provides 5V 500mA power » Use USB toggle switch to determine if KD-X4x1WUTx will be used to connect a USB host (USB-B » port) or USB device (USB-A port) . Both host and device are not simultaneously possible .
- Page 13 EDID Rotary › EDID authentication is provided from the unit to the connected » inputs/sources . The EDID file (AKA “handshake”) is selected using the EDID rotary on » the unit and provides a list of compatible video and audio formats as well as digital data, informing the source device what it should output .
- Page 14 Used for configuration and control from PC via KDMS Pro, KDMS, or » third-party control terminal Used for firmware updates (consult with Key Digital tech support » before updating firmware) Supports USB driver for Windows 10, 7, XP, Mac, Linux »...
- Page 15 » Has been verified some third-party HDBaseT Rx / projectors . » Contact Key Digital Technical Support for more information . Power over HDBaseT from Rx » IR In: Connect to the IR In terminals from a control system or an IR ›...
-
Page 16: Tcp/Ip Commands
TCP/IP Commands KD-X4x1WUTx allows bi-directional control over TCP/IP connection made at KD-X4x1WUTx, KD-UPS52U, or KD-X100MRx . Default static IP address is 192.168.1.239, port 23 › Notes: Commands are not case-sensitive » Commands require a carriage return following each string »... - Page 17 -- SPC DF00 : Reset to Factory Defaults without Network Reset ------------------------------------------------------------------------- Status Command (STA). Returns unit status and settings in readable format: ------------------------------------------------------------------------- Key Digital Systems STATUS ------------------------------------------------------------------------- -- Model: KD-X4x1WUTx, Device Name: X4x1WUTx_0001 -- Main F/W Ver: 1.14, CEC Ver: 1.02...
-
Page 18: Specifications
Specifications Technical: Inputs: 2 HDMI, 1 Display Port, 1 USB-C, 1 IR Sensor, 1 Serial IR, 1 Bi-Directional RS-232 » Outputs: 1 HDBaseT RJ45, 1 Bi-Directional RS-232 » DDC Signal (Data): Input DDC Signal: 5 Volts p-p (TTL) » HDMI Video/Audio Signal: Input Video Signal: 1 .2 Volts p-p »... -
Page 19: Important Product Warnings & Safety Instructions
» Exposure to rain or moisture » Power Supply Use: You MUST use the Power Supply PROVIDED with your unit or you VOID the Key Digital Warranty ® and risk damage to your unit and associated equipment. Contacting Key Digital ®... - Page 20 Home Theater Retailers, Custom Installers, System Integrators, Broadcasters, Manufacturers, and Consumers . Key Digital 521 East 3rd Street Mount Vernon, NY 10553 ® Phone 914.667.9700 914.668.8666 www.keydigital.com © 2020 Key Digital, Inc . All rights reserved .