HAKO Scrubmaster B 120 R Service Booklet page 15

2.1.2 Flashing the control unit
With CANUSB interface PN 03501750 (**): (Alternative connecting opportunity)
Connect the D-Sub 9 connection of the diagnostics cable marked CAN1 (red
marking) to the round plug of the interface using the adapter piece (D-Sub 9 to
7-pole round plug) included in the scope of delivery of the diagnostics cable.
Flashing the software:
- Turn on the machine.
- Start the Hako diagnostics software. Select the "HAKO" button, then click the
"Scrubmaster B120R" button. The application independently searches for a new,
blank control unit.
- Follow the instructions of the programme. Do not turn off the machine or
disconnect the connection before flashing has been completed.
- Carry out the settings for operative units, options, battery and parameters via the
display according to the training documents.
Sheet 15