HAKO Scrubmaster B 120 R Service Booklet page 96

13. Real-time clock (RTC)
• The respective value in the display can be increased and reduced by pressing tip
switch 4 and tip switch 3 respectively. If the respective tip switch is pressed and held
longer than one second, the value automatically changes at constant speed.
• If a value is changed, the bottom right dot behind the last number disappears.
• After pressing tip switch 5 for 3 seconds, the changed value is saved and the bottom
right dot behind the last number reappears.
• Exit the menu by turning off the machine.
• The settings can also be carried out via the Hako diagnostics system.
Sheet 96