Accessing Programming - HAKO Scrubmaster B 120 R Service Booklet

2.2.5 Accessing programming

The Scrubmaster B120R can be configured via the software and adapted to various
options. The machine is also adapted to the different hardware (machine type, rotating
brush head or roller brush head, batteries – LDS charger) via the software.
Changes to parameters not described in this manual can result in the machine
malfunctioning. Therefore, all changes to the configuration must be carried out with
utmost care.
Accessing the configuration menu
The procedure for accessing the configuration menu is described below:
•At first, connect diagnostics plug 0300 6790 to plug A1.X3 of the control electronics
(Fig. 2.2). This is necessary for changing and saving parameters.
Sheet 25