Changing The Suction Filter; Changing The Pressure Filter - Toro Multi Pro 1750 Operator's Manual

Turf sprayer, serial no. 400000000 and up
Hide thumbs Also See for Multi Pro 1750:
Table of Contents

Advertisement

Changing the Suction Filter

Service Interval: Every 400 hours
Note:
Determine the appropriate suction filter mesh
size that you need for your job; refer to
Suction Filter (page
34).
1.
Park the machine on a level surface, engage the
parking brake, shut off the pump, shut off the
engine, and remove the key.
2.
At the top of the sprayer tank, remove the
retainer that secures the hose fitting attached to
the large hose from the filter housing
Figure 53
1. Suction hose
3.
Remove the hose and hose fitting from the filter
housing
(Figure
53).
4.
Remove the old suction filter from the filter
housing in the tank
Note:
Discard the old filter.
Figure 54
1. Screen vane
5.
Install the new suction filter into the filter housing.
Note:
Ensure that the filter is fully seated.
6.
Align the hose and hose fitting to the filter
housing at the top of the tank, and secure the
Selecting a
(Figure
2. Retainer
(Figure
54).
2. Suction filter
fitting and housing with the retainer that you
removed in step 2.
Changing the Pressure
Filter
Service Interval: Every 400 hours
1.
Move the machine to a level surface, shut off the
sprayer pump, shut off the engine, and remove
the key.
2.
Align a drain pan under the pressure filter
53).
(Figure
55).
g033577
1. Filter head
2. O-ring (bowl)
3. Filter element
3.
Rotate the drain plug counterclockwise and
remove it from the bowl of the pressure filter
(Figure
55).
Note:
Allow the bowl to drain completely.
4.
Rotate the bowl counterclockwise and remove
from its filter head
5.
Remove the old pressure filter element
55).
Note:
Discard the old filter.
g033578
6.
Check the O-ring for the drain plug (located
inside the bowl) and the O-ring for bowl (located
inside the filter head) for damage and wear
(Figure
55).
Note:
Replace any damaged or worn O-rings
for the plug, bowl, or both.
7.
Install the new pressure filter element into the
filter head
54
Figure 55
4. Bowl
5. O-ring (drain plug)
6. Drain plug
(Figure
55).
(Figure
55).
g033293
(Figure

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multi pro 41188

Table of Contents