Toro Multi Pro 1750 Operator's Manual page 61

Figure 67
1. Flanged-head bolt
2. Manifold (master-section
valve)
Removing the Section-Manifold
Valve
1. Remove clamps and gaskets that secure the
manifold for the section valve
adjacent section valve (if left section valve, and
the reducer coupling).
Figure 68
1. Flange (reducer coupling)
2. Manifold (section valve)
3. Flange (adjacent section
valve)
g033309
3. Valve mount
4. Flanged locknut
(Figure 68) to the
g028236
4. Gasket
5. Flange clamp
2. Remove the retainers that secure the outlet
fitting to the section-valve manifold and the valve
manifold to the bypass fitting
1. Retainer
2. Socket (bypass fitting)
3. For the left or right section valves, remove the
flanged-head bolts and flanged locknuts that
secure the section valve(s) to the valve mount
and remove the valve manifold(s) from the
machine; for the center section valve, remove
the section-valve manifold from the machine
(Figure 70).
61
(Figure 69).
Figure 69
3. Socket (outlet fitting)
4. Manifold-valve assembly
g028238