Using the Control Panel
The COM Setup screen is used to change and save the settings for the serial
communication ports. The COM port number selected from the Serial Port Setup screen
will be displayed. If the changes are not wanted, the ABORT pushbutton may be used to
return to the Serial Port Setup screen. Figure 8-22 shows the COM Setup screen.
Use the
to toggle through the values for the setting to make the change. Press SAVE or ABORT.
Once the action is completed, the Serial Port Setup screen appears.
BAUD RATE
DATA BITS
STOP BITS
PARITY
8-20
or
pushbuttons to highlight the setting to be changed. Use the
COM 1 SETUP
i
Figure 8-23. COM Setup Screen
Powerware
9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev A
®
19200
8
1
NONE
SAVE
ABORT
pushbutton