Omron CS1W-NC113 Manual page 249

Memory Operation
Positions
Acceleration and
Deceleration Times
Dwell Times
Zones
Address Setting
11F4 04B0
11F5 0000
11F6 03E8
11F7 0000
11F8 03E8
11F9 0000
11FA 03E8
11FB 0000
Note Addresses other than the above should be set to their default settings (0).
The origin search acceleration and deceleration times will be used for accelera-
tion and deceleration and so this data needs to be set completely to the default
settings (0).
Dwell times are not used in these programs, so this data area needs to be set
completely to the default settings (0).
Zones are not used in these programs, so this data area needs to be set com-
pletely to the default settings (0).
Contents of setting
Position #0 1,200 pulses (4B0 Hex) , p
Position #1 1,000 pulses (3E8 Hex) , p
Position #2 1,000 pulses (3E8 Hex) , p
Position #3 1,000 pulses (3E8 Hex) , p
Section 10-2
( )
( )
( )
( )
239