Top, Rear, Bottom Panel Features And Cabling - Extron electronics Extender AAP User Manual

Top, Rear, Bottom Panel Features and Cabling

Extender WM, Extender WM AAP,
and Extender D
Rear View
Figure 5.
A
B
A
Extender MK, Extender AAP, Extender AAP EX, Extender WM AUS,
Extender AKM UK AAP, and Extender AKM MAAP
C
B
B
D
D
(Side)
Extender MK, Extender AAP, Extender AAP EX, Extender WM AUS,
Extender AKM UK AAP, and Extender AKM MAAP
Top, Rear, and Bottom Panel Features
Audio output connector, below
RGB video output connectors, page 11
Audio output connector (see
screws on this 3.5 mm, 5-pole direct insertion captive screw connector for unbalanced
or balanced audio output. Wire the connector as shown in the illustrations on the next
page.
Connect the sleeve to ground (Gnd). Connecting the sleeve to a
ATTENTION:
negative (-) terminal will damage the audio output circuits.
A
A
Extender MK/AAP/AAP EX,
Extender AKM UK AAP,
Extender AKM MAAP,
Extender WM AUS
Rear View
A
C
Bottom View
C
Power connector, page 12
C
Gain switch, page 12
D
figure 5, , above) — Insert wires into and tighten the
A
Extender Series • Installation
Top View
B
D
10