Configuring Nat - HIKVISION DS-7100NI-K1 Series User Manual

Click Apply to save the settings.
Select the Email tab to enter the Email Settings interface.
Configure the following Email settings:
Enable Server Authentication (optional): Check the checkbox to enable the server
authentication feature.
User Name: The user account of sender's Email for SMTP server authentication.
Password: The password of sender's Email for SMTP server authentication.
SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
SMTP Port No.: The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL/TLS (optional): Click the checkbox to enable SSL/TLS if required by the
SMTP server.
Sender: The name of sender.
Sender's Address: The Email address of sender.
Select Receivers: Select the receiver. Up to 3 receivers can be configured.
Receiver: The name of user to be notified.
Receiver's Address: The Email address of user to be notified.
Test: Sends a test message to verify that the SMTP server can be reached.
Click Apply to save the Email settings.
You can click Test to test whether your Email settings work. The corresponding
Attention message box will pop up.

Configuring NAT

Purpose:
Two ways are provided for port mapping to realize the remote access via the
cross-segment network, UPnP™ and manual mapping.
Network Video Recorder User Manual
Email Settings Interface
115