Upgrading By Ftp - HIKVISION DS-7100NI-K1 Series User Manual

Go to Menu > Maintenance > Upgrade.
Click the Local Upgrade tab to enter the local upgrade menu, as shown in Figure
12-7.
Select the update file from the backup device.
Click Upgrade to start upgrading.
After the upgrading is complete, reboot the NVR to activate the new firmware.

Upgrading by FTP

Purpose:
Ensure the network connection of the PC (running FTP server) and the device is valid
and correct. Run the FTP server on the PC and copy the firmware into the
corresponding directory of your PC.
Refer to the user manual of the FTP server to set the FTP server on your PC and put
the firmware file into the directory as required.
Go to Menu > Maintenance > Upgrade.
Click the FTP tab to enter the local upgrade interface, as shown in Figure 12-8.
Enter the FTP Server Address in the text field.
Network Video Recorder User Manual
Local Upgrade Interface
FTP Upgrade Interface
136