Configuring Email - HIKVISION DS-7100NI-K1 Series User Manual

Server Port and HTTP Port: Enter the Server Port and HTTP Port in the text fields.
The default Server Port is 8000 and the HTTP Port is 80, and you can change them
according to different requirements.
The Server Port should be set to the range of 2000-65535 and it is used for remote
client software access. The HTTP port is used for remote IE access.
Click the Apply button to save and exit the interface.

Configuring Email

Purpose:
The system can be configured to send an Email notification to all designated users if
an alarm event is detected, etc., an alarm or motion event is detected or the
administrator password is changed.
Before configuring the Email settings, the NVR must be connected to a local area
network (LAN) that maintains an SMTP mail server. The network must also be
connected to either an intranet or the Internet depending on the location of the
e-mail accounts to which you want to send notification.
Go to Menu > Configuration> Network.
Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS
Server in the Network Settings men.
Network Video Recorder User Manual
Configure More Settings
Network Settings Interface
114