Triggering Or Clearing Alarm Output Manually - HIKVISION DS-7100NI-K1 Series User Manual

Triggering or Clearing Alarm Output Manually

Purpose:
Sensor alarm can be triggered or cleared manually. If "Manually Clear" is selected in
the dropdown list of dwell time of an alarm output, the alarm can be cleared only by
clicking Clear button in the following interface.
Select the alarm output you want to trigger or clear and make related operations.
Go to Menu> Manual> Alarm.
Click Trigger/Clear if you want to trigger or clear an alarm output.
Click Trigger All if you want to trigger all alarm outputs.
Click Clear All if you want to clear all alarm output.
Network Video Recorder User Manual
Clear or Trigger Alarm Output Manually
105