Chapter 10 Hdd Management; Initializing Hdds - HIKVISION DS-7100NI-K1 Series User Manual

Chapter 10 HDD Management

Initializing HDDs

Purpose:
A newly installed hard disk drive (HDD) must be initialized before use.
Option 1: Initialize HDD from Startup Wizard
When the device starts up, the Setup Wizard can guide you to configure some basic
settings.
In the General settings interface, check Initialize HDD to initialize the HDD which it is
used for the first time.
Option 2: Initialize HDD from HDD management interface
Go to Menu > HDD > General.
Select HDD to be initialized.
Click the Init button.
Network Video Recorder User Manual
Initialize HDD
HDD Information Interface
123