Calling Linear Scan; One-Touch Park - HIKVISION DS-7100NI-K1 Series User Manual

The speed dome starts linear scan from the left limit to the right limit, and you must
set the left limit on the left side of the right limit, as well the angle from the left limit
to the right limit should be no more than 180º.

Calling Linear Scan

Before operating this function, make sure the connected camera supports the linear
scan and is in HIKVISION protocol.
Purpose:
Follow the procedure to call the linear scan in the predefined scan range.
Click PTZ in the lower-right corner of the PTZ setting interface;
Or press the PTZ button on the front panel or click the PTZ Control icon
the quick setting bar to enter the PTZ setting menu in live view mode.
Click the button to show the one-touch function of the PTZ control.
Click Linear Scan to start the linear scan and click the Linear Scan button again to
stop it.
You can click Restore to clear the defined left limit and right limit data and the
dome needs to reboot to make settings take effect.

One-touch Park

Before operating this function, make sure the connected camera supports the linear
scan and is in HIKVISION protocol.
Purpose:
Network Video Recorder User Manual
PTZ Panel - One-touch
49
in