Engineering Labels
1
Attaching Labels
a
Attaching Labels to Power Cables
NOTE
As a general rule, attach the labels to the cables 2 cm away from the connectors.
Cable
Attach the identification label on top of the cable
when cabling is done horizontally.
b
Attaching Labels to Signal Cables
Optical fiber
Label
NOTE
If a cable is routed vertically, the label needs to face to the right. If a cable is routed horizontally, the label
needs to face downwards.
Identification label
To:
B03 — –48V2
Fold to the right
Cable
Optical fiber
Fold upwards
70
Attach the identification label to
the right side of the cable when
cabling is done vertically.
Identification label
Optical fiber
To:
A03-33-33-33-33