Checking The Power Jumpers On The Board; Checking Power Jumpers On The Gscc; Position Of The Jumpers Of The N1Gscc (Layout 1); Position Of The Jumpers Of The N1Gscc (Layout 2) - Huawei OptiX OSN 3500 Quick Installation Manual

3

Checking the Power Jumpers on the Board

a

Checking Power Jumpers on the GSCC

NOTE
Check the power jumper settings and modify the settings as required. By default, the power jumpers are capped.

• Position of the jumpers of the N1GSCC (layout 1)

• Position of the jumpers of the N1GSCC (layout 2)

Power
module
C
F
card
J8
J9
J10
J11
CPU
J13
J12
J18
3 2 1
9
To set the input voltage of the
equipment
NOTE
When the jumpers are not capped, the equipment is
supplied with the –60 V power.
When the jumpers are capped, the equipment is
supplied with the –48 V power.
To set the input voltage of the
equipment
NOTE
When the jumpers are not capped, the equipment is
supplied with the –60 V power.
When the jumpers are capped, the equipment is
supplied with the –48 V power.