Installing And Routing Sdi Coaxial Cables; Ports On The Vst4 Board; Installing Sdi Coaxial Cables - Huawei OptiX OSN 3500 Quick Installation Manual

11

Installing and Routing SDI Coaxial Cables

a

Ports on the VST4 Board

Ports on the
Front Panel
IN1-IN4
OUT1-OUT4
NOTE
The VST4 board provides four separate multi-service access ports, which are applicable to
transparent transmission of four video services.
b

Installing SDI Coaxial Cables

OUT1 IN1 OUT2
Type of Port
SMB (which can be converted to BNC
through a conversion cable)
SMB (which can be converted to BNC
through a conversion cable)
Front view
1
2
3
4
Side
5
View
6
7
8
IN2 OUT3 IN3 OUT4
Application
Receives electrical signals of the DVB-
ASI, SD-SDI, or HD-SDI service.
Transmits electrical signals of the DVB-
ASI, SD-SDI, or HD-SDI service.
NOTE
The description uses cable routing on the
right side as an example. When routing
cables on the left side, use the same
method.
The description uses underfloor cabling as
an example. For overhead cabling, use the
same method.
CAUTION
Bind SDI coaxial cables using the method
illustrated in the figure on the left side,
because of insufficient cable routing space.
That is, bind cables at ports 1–4 and 4–8,
and then bind cables at ports 1–8.
60
IN4
SDI coaxial cables