Displaying Electronic Labels - Huawei Quidway S9300 Configuration Manual

Quidway S9300 Terabit Routing Switch
Configuration Guide - Device Management
Route Port,The Maximum Transmit Unit is 1500
Internet Address is 1.1.1.1/24
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 0022-0033-0044
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Input:
Output:
[Quidway-Vlanif3] display this interface
Vlanif3 current state : DOWN
Line protocol current state : DOWN
Description:HUAWEI, Quidway Series, Vlanif3 Interface
Route Port,The Maximum Transmit Unit is 1500
Internet Address is 1.1.1.1/24
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 0022-0033-0044
Last 300 seconds input rate 0 bits/sec, 0 packets/sec
Last 300 seconds output rate 0 bits/sec, 0 packets/sec
Input:
Output:

1.2.11 Displaying Electronic Labels

You can use the display command to view information about electronic labels, including the
board type, BOM code, description, manufacture date, vendor name, issuing number, Common
Language Equipment Identification (CLEI) code, and sales BOM code.
Context
Do as follows on the S9300 whose electronic labels are to be viewed.
Procedure
Step 1 Run:
display elabel [ backplane | [ slot-id ] [ brief ] ]
Electronic labels are displayed.
You can run the command in any view to view the electronic labels of the S9300. slot-id can be
specified to view label information about the board in a specified slot. The information displayed
includes the board type, bar code, item, description, manufacture date, vendor name, issuing
number, Common Language Equipment Identification (CLEI) code, and BOM code.
brief indicates whether the electronic label of an optical module needs to be displayed. If
brief is specified, the electronic label of an optical module is not displayed.
----End
Example
<Quidway> display elabel 9 brief
It is executing, please wait...
[Slot_9]
/$[Board Integration Version]
/$BoardIntegrationVersion=3.0
[Main_Board]
Issue 01 (2010-12-15)
0 packets, 0 bytes
0 packets, 0 bytes
Input bandwidth utilization
Output bandwidth utilization : --
0 packets, 0 bytes
0 packets, 0 bytes
Input bandwidth utilization
Output bandwidth utilization : --
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: --
: --
1 Displaying the Device Status
1-11