Frame By Frame Recording - Cut Recording; Advanced Playback Operation; Playing Back A Tape With Picture Effects; Playing Back A Tape With Digital Effects - Sony DCR-TRV30E Service Manual

Frame by frame recording
– Cut recording
You can make a recording with a stop-motion
animated effect using cut recording. To create
this effect, alternately move the subject a little
and make a cut recording. We recommend that
you use a tripod, and operate the camcorder
using the Remote Commander after step 6.
(1) Press MENU to display the menu in standby
mode.
(2) Turn the SEL/PUSH EXEC dial to select
then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select
FRAME REC, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select ON,
then press the dial.
(5) Press MENU to erase the menu display.
The FRAME REC indicator lights up.
(6) Press START/STOP to start cut recording.
The camcorder makes a recording for about
six frames, and returns to recording standby.
(7) Move the subject, and repeat step 6.
1
MENU
2-4
CAMERA SET
D ZOOM OFF
16 : 9W I DE
STEADYSHOT
N. S. L I GHT
FRAME REC
I NT. REC
FLASH LVL
CAMERA SET
[MENU] : END D ZOOM
16 : 9W I DE
STEADYSHOT
N. S. L I GHT
FRAME REC OFF
I NT. REC ON
FLASH LVL
RETURN
CAMERA SET
[MENU] : END
D ZOOM
16 : 9W I DE
STEADYSHOT
N. S. L I GHT
FRAME REC ON
I NT. REC
FLASH LVL
RETURN
[MENU] : END
74
— Advanced Playback Operations —
Playing back a tape
with picture effects
During playback, you can process a scene using
the picture effect functions: NEG. ART, SEPIA,
B&W and SOLARIZE.
(1) In the playback or playback pause mode,
select P EFFECT in in the menu settings
(p. 130).
(2) Select the desired mode by turning the SEL/
PUSH EXEC dial.
For details of each picture effect function, see
page 61.
MENU
To cancel the picture effect function
Set P EFFECT to OFF in the menu settings.
Notes
•You cannot process the picture that is input
from other equipment using the picture effect
function.
•To record pictures that you have processed
using the picture effect function, record the
pictures on the VCR, using your camcorder as a
player.
Pictures processed by the picture effect
function
Pictures processed by the picture effect function
are not output through the DV IN/OUT jack.
When you set the POWER switch to OFF (CHG)
or stop playing back
The picture effect function is automatically
canceled.
76
,
(1)
(2)
(3)
(4)
(5)
(6)
(7)
6
5
FRAME REC
MENU
(1)
(2)
1
MA N U A L S E T
P E F F E C T
O F F
R E T U R N N EG A R T .
S E P I A
B &W
SO L A R I Z E
[ ME N U ] : E N D
Frame by frame recording
– Cut recording
To cancel the cut recording
•Set FRAME REC to OFF in the menu settings.
•Set the POWER switch to OFF (CHG), VCR, or
MEMORY.
Notes on cut recording
•The last recorded cut is longer than other cuts.
•The proper remaining tape time is not indicated
if you use this function continuously.
Playing back a tape
with digital effects
During playback, you can process a scene using
the digital effect functions: STILL, FLASH, LUMI.
and TRAIL.
(1) In the playback or playback pause mode,
press DIGITAL EFFECT and turn the SEL/
PUSH EXEC dial until the desired digital
effect mode flashes.
The indicator changes as follows:
STILL y FLASH y LUMI. y TRAIL
(2) Press the SEL/PUSH EXEC dial.
The digital effect indicator lights up and the
bars appear. In the STILL or LUMI. mode, the
picture is captured and is stored in memory as
a still image at the time you press the SEL/
PUSH EXEC dial.
(3) Turn the SEL/PUSH EXEC dial to adjust the
effect, then press the dial.
For details of each digital effect function, see
page 62.
1
DIGITAL EFFECT
STILL
To cancel the digital effect function
Press DIGITAL EFFECT.
Notes
•You cannot process externally input scenes
using the digital effect function.
•To record pictures that you have processed
using the digital effect function, record the
pictures on the VCR, using your camcorder as a
player.
1-17
(1)
y y y
(2)
(3)
2
STILL
3
75
77