Frame By Frame Recording - Cut Recording - Sony DSR-PD150P Operating Instructions Manual

Frame by frame recording - Cut recording

You can make a recording with a stop-motion animated effect using cut recording. To
create this effect, alternately move the subject a little and make a cut recording. We
recommend that you use a tripod, and operate the camcorder using the Remote
Commander after step 6.
Press MENU to display the menu in standby mode.
(1)
Turn the SEL/PUSH EXEC dial to select , then press the dial.
(2)
Turn the SEL/PUSH EXEC dial to select FRAME REC, then press the dial.
(3)
Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(4)
Press MENU to erase the menu display.
The FRAME REC indicator lights up.
Press START/STOP to start cut recording. The camcorder makes a recording
for about six frames, and returns to recording standby.
Move the subject, and repeat step 6.
To cancel the cut recording
• Set FRAME REC to OFF in the menu settings.
• Set the POWER switch to OFF (CHG), VCR, or MEMORY.
Notes on cut recording
• The last recorded cut is longer than other cuts.
• The proper remaining tape time is not indicated if you use this function continuously.
• You cannot mark an index during cut recording.
61