Self-Diagnosis Display - Sony Handycam DCR-TRV240E Operating Instructions Manual

English

Self-diagnosis display

Your camcorder has a self-diagnosis display function.
This function displays the current state of your
camcorder as a 5-digit code (a combination of a letter
and figures) on the screen or in the display window.
If a 5-digit code is displayed, check the following list
of codes. The last two digits (indicated by ss) differ
depending on the state of your camcorder.
Five-digit display
C:04:ss
C:21:ss
C:22:ss
C:31:ss
C:32:ss
E:20:ss
E:61:ss
E:62:ss
If you are unable to rectify the problem even if you try corrective actions a few times, contact your
Sony dealer or local authorized Sony service facility.
Cause and/or Corrective Actions
• You are using a battery pack that is not an "InfoLITHIUM"
battery pack.
c Use an "InfoLITHIUM" battery pack (p. 21, 257).
• Moisture condensation has occurred.
c Remove the cassette and leave your camcorder for at least
one hour to acclimatize (p. 262).
• The video heads are dirty.
c Clean the heads using the Sony V8-25CLD cleaning cassette
(optional) (p. 263).
• A malfunction other than the above that you can service has
occurred.
c Remove the cassette and insert it again, then operate your
camcorder.
c Disconnect the mains lead of the AC power adaptor or
remove the battery pack. After reconnecting the power
source, operate your camcorder.
• A malfunction that you cannot service has occurred.
c Contact your Sony dealer or local authorized Sony service
facility and inform them of the 5-digit code. (example:
E:61:10)
LCD screen, viewfinder or
display window
C:21:00
Self-diagnosis display
• C:ss:ss
You can service your camcorder
yourself.
• E:ss:ss
Contact your Sony dealer or local
authorized Sony facility.
241