Sony Handycam DCR-TRV240E Operating Instructions Manual page 147

Changing the menu settings
Icon/item Mode
DATA CODE z DATE/CAM
DATE
WORLD TIME
—
BEEP
z MELODY
NORMAL
OFF
COMMANDER
z ON
OFF
DISPLAY
z LCD
V-OUT/LCD
Note
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a TV
or VCR will not appear on the screen even when your camcorder is connected to outputs on the TV or
VCR. (Except when your camcorder is connected with the i.LINK cable)
In more than five minutes after removing the power source
The AUDIO MIX, FLASH LVL, COMMANDER and HiFi SOUND settings are returned to their default
settings.
Other menu settings are held in memory even when the battery is removed.
Meaning
To display date, time and recording data during
playback
To display date and time during playback
To set the clock to the local time
Turn the SEL/PUSH EXEC dial to set a time
difference. The clock changes by the time difference
you set here. If you set the time difference to 0, the
clock returns to the originally set time.
To output the melody when you start/stop recording
or when an unusual condition occurs on your
camcorder
To output the beep instead of the melody
To cancel all sound including shutter sound
To activate the Remote Commander supplied with
your camcorder
To deactivate the Remote Commander to avoid
erroneous remote control operation caused by other
VCR's remote control
To show the display on the LCD screen and in the
viewfinder
To show the display on the TV screen, LCD screen
and in the viewfinder
(continued on the following page)
POWER
switch
VCR
MEMORY
CAMERA
MEMORY
CAMERA
VCR
MEMORY
CAMERA
VCR
MEMORY
CAMERA
VCR
MEMORY
147