Changing the menu settings
Icon/item
*
PROTECT
SLIDE SHOW
PHOTO SAVE
FILE NO.
DELETE ALL
FORMAT
Notes on formatting*
•Supplied "Memory Stick"s have been formatted at factory. Formatting "Memory Stick"s on your
camcorder is not required.
•Do not do any of the following while FORMATTING is displayed:
– Switch the POWER switch
– Operate buttons
– Remove the "Memory Stick"
•You cannot format the "Memory Stick" if the write-protect tab on the "Memory Stick" is set to LOCK.
•Format the "Memory Stick" when "
Formatting erases all information on the "Memory Stick"*
Check the contents of the "Memory Stick" before formatting.
• Formatting erases sample images on the "Memory Stick."
• Formatting erases protected image data on the "Memory Stick."
* DCR-TRV340E/TRV341E/TRV740E only
144
Mode
Meaning
ON
To protect selected images against accidental erasure
(p. 225)
z OFF
To not protect images
—
To play back images in a continuous loop (p. 223)
—
To copy still images on tape onto "Memory Stick"
(p. 188)
z SERIES
To assign numbers to file in sequence even if the
"Memory Stick" is changed
RESET
To reset the file numbering each time the "Memory
Stick" is changed
z RETURN
To cancel deleting all images
OK
To delete all unprotected images
z RETURN
To cancel formatting
OK
To format an inserted "Memory Stick"
1. Select FORMAT with the SEL/PUSH EXEC dial,
then press the dial.
2. Select OK with the SEL/PUSH EXEC dial, then
press the dial.
3. After EXECUTE appears, press the SEL/PUSH
EXEC dial. FORMATTING flashes during
formatting. COMPLETE appears when formatting
is finished.
FORMAT ERROR" is displayed.
POWER
switch
VCR
MEMORY
MEMORY
VCR
VCR
MEMORY
MEMORY
MEMORY